Why Do Dirt Bike Turns Off When Put In Gear? One of the most common issues that dirt bike riders face is their vehicle turning off when put into gear. There are a few reasons why this might happen, the most common being an issue with the kill switch or a problem with the carburetor. In some cases, it may also be due to a loose battery connection. If your dirt bike turns off when put in gear, it is important to troubleshoot the problem as soon as possible to prevent any further damage.
Does Your Dirt Bike Turn Off When Put In Gear? Here is the Solution!
In this article, we are going to discuss all the possible issues in detail with their easy solution.
Below are the possible reasons why your dirt bike is turned off when you put in the gear.
- Air in the hydraulic clutch system
- Airflow blockage
- The Clutch lever popped out from the hand
- Clutch still engaged
- Constricted clutch plates
- The engine is not tuned properly
- Idle positioned too low
- Inadequately tuned engine
- Leaking master cylinder
- Malfunctioning side stand switch
- Loose clutch cable
1- Air in Hydraulic Clutch System
The first reason your dirt bike might turn off when you put it in gear can be because there is air in the hydraulic clutch system. When there is air in the system, it reduces the pressure that is required to engage the clutch. As a result, the clutch does not engage properly and may slip when you try to accelerate.
To fix this problem, you will need to bleed the hydraulic system to remove any air bubbles. This is a straightforward procedure that may be done with the aid of a buddy.
2- Airflow Blockage
Another possible reason for your dirt bike turning off when in gear can be an airflow blockage. When the engine is running, it relies on a steady supply of air to maintain the correct operating temperature. If the engine is starved of air, it will overheat and may shut down.
To prevent this from happening, make sure there are no obstructions blocking the airflow to the engine. This includes things like leaves or dirt build-up around the air filter.
3- Clutch Lever Popped Out From Hand
In some cases, the clutch lever may pop out of your hand while you are shifting gears. This can happen if you are not holding the lever in the correct position. When this happens, it can cause the clutch to disengage abruptly, leading to the engine shutting down.
To fix this problem, make sure you are holding the clutch lever in the correct position. If the lever is still popping out, you may need to adjust the tension on the clutch cable.
4- Clutch Still Engaged
Another possible reason for your dirt bike turning off when in gear can be that the clutch is still engaged. This can happen if you do not fully release the lever before shifting gears. When the clutch is still engaged, it can cause the engine to stall.
To fix this problem, make sure you fully release the clutch lever before shifting gears. If the problem persists, you may need to adjust the tension on the clutch cable.
5- Constricted Clutch Plates
The next possible reason your dirt bike might turn off when in gear can be constricted clutch plates. When the clutch plates are constricted, it can cause the engine to stall. This is because the constriction prevents the clutch from disengaging properly.
To fix this problem, you will need to replace the constricted clutch plates. This is a relatively simple process that can be done with the help of a friend.
6- Engine Not Tuned Properly
Another possible reason for your dirt bike turning off when in gear can be that the engine is not tuned properly. When the engine is mistuned, it might lead to a variety of issues, including stalling.
If your dirt bike’s engine is noisy, it’s time to visit a mechanic and have the engine tuned.
7- Idle Positioned Too Low
The next possible reason your dirt bike might turn off when in gear can be that the idle is positioned too low. When the idle is too low, it can cause the engine to stall.
To fix this problem, you will need to adjust the idle screw until it is positioned correctly.
8- Loose Clutch Cable
The next possible reason for your dirt bike turning off when in gear can be a loose clutch cable. When the clutch cable is loose, it can cause the clutch to disengage abruptly, leading to the engine shutting down.
To fix this problem, you will need to adjust the tension on the clutch cable. If the problem persists, you may need to replace the clutch cable entirely.
9- Throttle Positioned Too Low
The final possible reason your dirt bike might turn off when in gear can be that the throttle is positioned too low. When the throttle is too low, it can cause the engine to stall.
To fix this problem, you will need to adjust the throttle until it is positioned correctly.
10- Leaking Master Cylinder
The last possible reason your dirt bike might turn off when in gear can be a leaking master cylinder. When the master cylinder is leaking, it can cause the clutch to disengage abruptly, leading to the engine shutting down.
To fix this problem, you will need to replace the leaking master cylinder.
11- Malfunctioning Side Stand Switch
The last possible reason your dirt bike might turn off when in gear can be a malfunctioning side stand switch. When the side stand switch is not working properly, it can cause the engine to stall.
To fix this problem, you will need to replace the side stand switch.
How to Shift Dirt Bike Properly?
Conclusion
These are just a few of the possible reasons why your dirt bike might turn off when in gear. If you are having this problem, it is important to troubleshoot and find the root cause so you can fix it and get back on the trails.
